Moving Die (MD) Rheometer controlled by Personal Computer.STANDARDS:
ISO 6502; ASTM D 6204; 
DIN 53 529-3

Gibitre MD Rheometer measures the cure characteristics of a rubber compound in conformity with the international standards.
The measure of the vulca nisation is carried our by measuring the change in the mechanical characteristics of the sample. The instrument permits to apply a cyclic strain to a test piece and to measure the associated force. The test is carried out at a constant temperature and the measure of stiffness recorded continuously as a function of time.""""

Instrument Characteristics
Pressurized Testing chamber
Torque measurement reaction transducer positioned in the upper test chamber to minimize the influence of friction and vib rations.
Easily accessible test area with transparent safety panel and safety lock. Test chamber in compliance with international standards.
Direct test chamber heating controlled by thermoregulators with PID microprocessor with O.1 °C accuracy. Easy change of oscillation angle of lower die.
Control system for compressed air pressure, cleaning and lubrication. Designed for eventual application of a fume aspiration system.

Volumetric die cutter.
Polyester or Polyamide film for test execution"""

Gibitre-RheoCheck Software
Graphic representation of the following curves: Elastic (S’), Viscous (S’’), Complex (S*), storage shear Modulus (G’), loss shear Modulus
(G’’), Curing Speed, Tan-Delta, upper and lower test chamber temperatures.
Display and printing in different colours of the relative test curves for rapid test identification. Customizable test procedure with possibility of selecting up to 20 test results to be stored and printed (see table).
Checking of whether results comply with tolerance limits and relative statistical analysis (Mean, St. Dev., Max, Min, Cp, Cpk, X-Chart, Gaussian Distribution).
Automatic generation of tolerance limits from statistical analysis (mean and standard deviation) of stored results."""

Detaylı bilgi almak bizimle irtibata geçin